BlueBaronMachines.com
 Call us: 727-505-2989
Why to Advoid Propane & Oil Fired Truck Mounts
Danger looms over these Truck Mounts
Another Judson Truck Mount Propane Disaster
Send us your Pictures, Drawings and or Videos, and we will spend the time helping Tailor fit our Axis Point Heat Exchangers to fit your Truck Mount Carpet Cleaning Machine. 
  BIG FIRES COME FROM 'LITTLE GIANTS'
Safest & Best Alternative is Heat Exchange, using FREE Heat from the most Innovative Design in the Industry known as "Axis Point" Technology." Our Patented Design will far exceed your expectations.

Here is Proof in the video.
Jul 24, 2014 at 6:44 PM

Name: Chris Nierling
Email address:rugmaster7@aol.com
Phone:352-572-9184

Message:I am the owner of Chris Carpet Care Inc in Ocala/Belleview/The villages Fl. I hve had my own business for 20 years and been carpet cleaning for 34 years. I was around people that knew how to put machines together so I have had experience with different kinds of equipment. In all my years the heat exchanger that Pete makes is by far the best exchanger I have ever used. I get excellent heat off the engine. Its compact and well built. In the two years I have had it it has made a difference in my cleaning excellence. Thank you Pete for a wonderful piece of equipment. Chris Nierling Chris Carpet Care Inc.
Shooters Scott (Facebook Testimonial)

September 2 at 8:05pm

Anyone who understands heat exchangers knows that what Pete has designed is flat out awesome. I say this because i purchased one from Pete through Ebay and am 100 % satisfied from the results of this coiled stainless steel heat exchanger. I have been looking for a coiled heat echanger made of stainless steel for many years. Not only is this flat out perpormance but well designed as well. Pete delivered on time plus a low cost in shipping. I have a custom designed machine that has a 27 hp Kawasaki engine and a roots 45 blower. I look forward to doing more business with pete in the coming years and would recommend this unit to anyone. If you have been using proane copper STOP you will be disappointed because copper cracks. Stainless steel coils are the way to go. I have been in business for 22 years ( allcolorscarpet cleaning dyeing) out of indianapolis. Way to go Pete hope your hand is doing better
I purchased the heat Exchanger from Pete and I couldn't say this is one of the best Heat exchangers I have ever used . I installing my heat exchanger to a kolher 25 hp engine and I can say my water temperature is around 200°F plus in less than 5 Minutes of using my carpet truck mount . It's made from 100% stainless steel heavy-duty built to last. I took a look inside the heat exchanger from one of the openings from the exhaust side and you can see the stainless steel tubing inside heat exchanger so that your water temperature could heat up quicker . I clean Carpets that are from Apartments restaurants with heavy grease and I could say that this heat exchanger made a lot a difference in my new cleaning technique. Since my water is hotter I can use less solution that saves me money. I would recommend n e one to get this heat exchanger stop looking around and just buy this one you will be very happy with the design . Thank you Pete once again for creating such a good heat exchanger you had made a customer very happy and I will gladly come back again . 

Jesus Alcantar Email: eljesus210@hotmail.com

Hello,
  I spoke to you earlier regarding a receipt for a heat exchange that I purchased from you on 04/28/2014 for 1,107.45. My company is All Pro Floors & More, Inc. 

Also, I would like to let you know this is one of the best heat exchanges I have seen. It was equipped perfectly for my machine and my water is hot in seconds. I am very satisfied and happy with Blue Baron Carpet for their service and timeliness in delivery of my product. I would definitely recommend them. 
Thank you again!

Anne Marie Bailey
President
All Pro Floors & More, Inc.
Email: AllProFloorsandMore@outlook.com 
Steve Clayton Sunday 5/24/09 5:17 PM 

Bought this unit about a year ago. This thing is HOT!!! I have burned myself numerous time because of the heat it puts out. Peter is an extremely patient person. I used a portable unit before my purchase, what a difference. He does what he says and answers all your questions. I am waiting for his CD's he now offers and would refer anyone wanting this unit and if you are here in Texas, come on by and see it work...

From:: Lockhart, TX
Email: fiveocarpetcleaning.com 

Heat Exchanger
From:Cruzzin66@aol.com
To:pgarland@bluebaronmachines.com
Priority:Normal
Date12-30-2013 06:10 PM

Hey Pete,

 Just wanted to say thanks again and it was great seeing you. You should be proud of all your hard work and designs you've done.. I finally got some time to install and mount the heat exchanger you made me and its doing well on my Spitfire. Hopefully you get your building done in back soon so you have some extra room to maneuver all that equipment.. :)

  Thanks,
  Mike
Name:BRIAN LAFFERTY
Email address:KINGSCLEANMASTER@gmail.com
Phone:215-668-6980

Message:wow what heat I HAVE RAN EVERY KIND OF SLIDE IN TRUCK MOUNT THERE IS FROM STEAMACTION TO PRO CEM WHICH I RUN A 405 PERFORMER I HAVE BLUE BARON'S AXIS POINT QUAD HEAT EXCHANGER ON A PANTHER AND I HAVE AS MUCH HEAT AS I WOULD EVER NEED. THE BEST HEAT ON THE MARKET TODAY!

B LAFFERTY
Hi Pete!

About 3-4 years ago I purchased a Heat exchanger from you. I modified a prox. 30+ years old Steamway Odessy, and fitted in. Then I haven?t used it, because I had a good high paying job as a tradesman, at the time. I lost my job a year ago, so I finished off my little project, and started to clean carpet, with the hope; I get to know the guys in the industry, and can start repairing equipment for them. I also have a few little ideas to develop and make some accessories for the cleaning industry. I was cleaning a big school with another guy, who have a $20 000.00 plus truck mount, and his jaw dropped down, when he see me operating with your heat exchanger in an old machine. We all lose 20-degree +, when running 150+ hose, but when you see the heat pouring out from my wand, and see how is cleaning, you don?t need to check the temperature. When I record it, I was running with 200-feet hose. It is good is many expensive unit out there. I made a little movie clip from my wand with my mobile phone, I would like you to see it, don?t know how I can send it, in Contact us not have place for attachment. I am thinking on a small way, specialize converting some older units with a new heat exchanger, for the ones who can't afford a new machine. The problem is to get it here, Thanks for a good product, Regards; Tamas Tassonyi I am in Melbourne, Australia.

Name:Tamas Tassonyi
Email address:tassonyi@ymail.com
Phone:61430447760
Name: Martin Hovatter
Email address:kidderamanda@yahoo.com
Phone: Furnished Upon Request

Message:What can I say about my heat exchanger? Excellent! Peter and his wife are great people to deal with especially with technical issues.Shipping and packaging was good and the exchanger was just as described.I will definetly be doing business with Blue Baron again-Thank You, Martin Steam-Works
Hi Peter

My Partner and I are very happy with the work you did on our Performer Cub XL. I can see Great Skilled Workmanship went into this Heat Exchanger to make such a perfect Fit into my machine.

Just knowing there is someone like you that can build a Discontinued Prochem Cub Heat Exchanger, makes you a "Life Saver." My machine is like New now and the Axis Point Heater Design is giving us better Heat than the Old Original OEM Heat Exchanger.

Again Many Thanks for a Great Job!

Ray from R & J Carpet-Tile & Grout Cleaning LLC
Tele: Upon Request
Email: raymond.widing@yahoo.com
Kevin D McNair June 9, 2015 
Round Rock, TX 78664
Email: KevinMcnair@gmail.com

Hi Pete 
It was pleasure working with the Axis Point Heat Exchanger, where the Heat is Smoking Hot and consistent. So many Heat Exchangers I used in the past always fluctuated where it was impossible to get steady heat. Thanks for the Great Job!

Many Thanks,
Kevin
​Roy Bolton <roy_bolton64@yahoo.com> 6/19/16
Tojgarland1957@yahoo.com Today at 12:38 AM


I have received my axis point heat exchanger and with some expected fab work it works as expected. Pete is a good guy to deal with and knowledgeable about what he he sells. I converted a CHEM-TEX truck mount to his heat exchanger. I had no luck with Chem -Tex , they are metal to metal construction and I had them tig welded many times due to vibration. Chem-tex is a very poor design. We are getting good heat now with the axis point heat exchanger . Customer service is every thing when you are dealing with a small company. That is why I try to deal with independent businessmen. After all I'm a small business . Also his warrantee is simple and to the point no small print . I called Pete many times and he was always available for questions. Thanks Pete!
Fred Adrian  
Roadrunner Equipment
Modesto, CA

Hi Pete 

Just wanted to let you know that I am real happy with the results Axis Point Heat Exchanger for my Prochem Legend. Everything went smooth installing this unit and it is working great!

Many Thanks, Fred


Youtube Logo
iamtimyeater commented on your video
 Blue Baron Truck Mounts 'The Best of the Best'

iamtimyeater

Man that's really cool normally it takes diesel or propane to get that kind of heat. I had a power clean Genesis that had two Heat exchangers it the best I could ever hit was high 180s in the summer you could see 190 200 if it was a100 out but rolling steam was a rare thing we had to add propane heater that machine is long gone thank goodness
REPLY MANAGE ALL COMMENTS
David Shooters Scott‎ to Blue and Red Baron Truck Mount Carpet and Tile Cleaning Machines
8/21/16 at 10:13am (Facebook Entry) 

I bought a heat exchanger from Blue Baron last year and I am pleased to day it works great. I get the most heat from it when I run it around 5500-6000 rpm. I have a kawasaki 27 hp water cooled and a 4.5 blower roots. It deserves a 5 star performance.